Renegade SE

Renegade SE Full View
Renegade SE Full View Close
Renegade SE Ignited
Renegade SE
Renegade SE Close Ignited
Renegade SE Close
Renegade SE Black Claws
Renegade SE Body
The Renegade SE Ignited
The Renegade SE From UltraSabers.com

Renegade SE

$259.00

CUSTOMIZATION BREAKDOWN

Choose Your Configuration

Diamond Controller

Not all Configurations work with every hilt
UltraSabers-Stunt-Lightsaber-ConfigurationStandard Lightsaber without sound.
UltraSabers-DIY-Empty-Lightsaber-Hilt-ConfigurationEmpty Lightsaber Hilts for DIY'ers.
UltraSabers-Basic-Sound-Lightsaber-ConfigurationLightsabers with the Obsidian LITE Soundboard.
UltraSabers-Premium-Sound-Lightsaber-ConfigurationLightsabers with the Obsidian v3 or v4 Soundboard.
UltraSabers-Emerald-Stunt-Lightsaber-ConfigurationStunt Lightsabers equipped with the Emerald LED Driver.
UltraSabers-Emerald-With-Sound-Lightsaber-ConfigurationLightsabers equipped with the Emerald LED Driver AND Obsidian Soundboard.
UltraSabers-Diamond-Controler-Lightsaber-ConfigurationUltraSabers equipped with the Ultimate LED & Sound Controller +Gesture Recognition

Diamond Crossguard LED Type

RGBW LED
***RENEGADE & FLAMBERGE: Please note that crossguard sabers can have all 4 channels connected to all 3 blades with the Diamond Controller. The color and activity of the side blades will always match the color of the primary blade. So now you can change the color of your side blades when you change the color of the main blade. They will all change together. UPDATED 05/06/2017***

Crossguard Main Blade LED Color

Blazing Red for Diamond
Choose the color of your main blade!

Blazing Red, Consular Green, Guardian Blue, Fire Orange, and Adegan Silver are all made with single diode High Powered LEDs.

Violet Amethyst, Sunrider's Destinty, and Arctic Blue are all made with multicolor RGB LEDs and combining two diodes to create the Blade Color.

To use color discs you remove the blade, drop a disc down the blade socket, then replace the blade. These only work properly with the Adegan Silver blade color. Colors obtained using color discs create a blade that is significantly dimmer than if you just ordered that color blade standalone (for example Guardian Blue is much brighter than using a blue color disc).

UltraPixel Blade Color

UltraPixel String Blade

Crossguard Left Blade LED Color

No LED
Choose the color of your left blade!

To use color discs you remove the blade, drop a disc down the blade socket, then replace the blade. These only work properly with the Adegan Silver blade color. Colors obtained using color discs create a blade that is significantly dimmer than if you just ordered that color blade standalone (for example Guardian Blue is much brighter than using a blue color disc).

Crossguard Right Blade LED Color

No LED
Choose the color of your right blade!

To use color discs you remove the blade, drop a disc down the blade socket, then replace the blade. These only work properly with the Adegan Silver blade color. Colors obtained using color discs create a blade that is significantly dimmer than if you just ordered that color blade standalone (for example Guardian Blue is much brighter than using a blue color disc).

Left/Right Blade Channel

Channel 4 (Dedicated to AV Switch) [Recommended]
This option ONLY applies if you selected to have LEDs installed for the Left and/or Right crossguard blade. If you did not opt for LEDs for the Left or Right crossguard blade then please disregard this option.

Also, the Left and Right Crossguard blades do NOT change colors. Once you select a color it will always be that color. This option only dictates how we supply power to the Left and/or Right crossguard blade.

In addition, keep in mind you can have BOTH the crossguard blades AND your illuminated AV Switch (if you opt for one) configured the same way. For example, they can all be dedicated to channel 4 (Recommended).

Main Blade Type

36" Midgrade
Select what blade type and length you want.

Clear is made from clear polycarbonate and with the Ultrafilm in it, it has the "silvery" look to it.

White is made from white polycarbonate and is traditionally known as an "Ultraedge" blade.

Left Blade Type

6" Midgrade
Select what blade type and length you want.

Clear is made from clear polycarbonate and with the Ultrafilm in it, it has the "silvery" look to it.

White is made from white polycarbonate and is traditionally known as an "Ultraedge" blade.

Check out our SaberForum post that explains the difference between each of our available blade types here! (Link will open in a new tab)

Right Blade Type

6" Midgrade
Select what blade type and length you want.

Clear is made from clear polycarbonate and with the Ultrafilm in it, it has the "silvery" look to it.

White is made from white polycarbonate and is traditionally known as an "Ultraedge" blade.

Check out our SaberForum post that explains the difference between each of our available blade types here! (Link will open in a new tab)

Diamond Flash on Clash

Flash Off for Diamond

Diamond Pulse Mode

Diamond Pulse Off

Emerald Driver Configuration

4 Channel Emerald Driver - RGBW LED

Flash on Clash

No Flash
PLEASE NOTE: Flash on Clash is not possible with Tri Cree LEDs. If you have selected a Tri-Cree LED, then your saber cannot support Flash on Clash. You can only have one or the other. If you would like to add Flash on Clash, please go back and select a non-Tri-Cree LED blade color.

Pulse Mode

Pulse Off

Battery Configuration

Standard Setup
***The VP1 Charger is HIGHLY recommended for all Li-Ion setups. This is by far the superior charger for Li-Ion battery care and maintenance.***



Standard Setup is a setup that uses regular AAA batteries to power your saber. (4xAAA batteries for all colors). You can use regular Alkaline batteries or rechargeable NiMh batteries (not provided).

Our Li-Ion battery Setups are the superior battery pack configurations. A Li-Ion battery configuration is required for all sabers with sound. (Your saber only comes with sound if it says WITH SOUND in the title of the saber name)

We recommend checking out our post that explains our Li-Ion Setups here! Li-Ion batteries (and charger if applicable) are always provided with these setups.

Recharge Port

No Recharge Port

Diamond Sound

Diamond Sound
All Diamond Controllers come equipped with sound.

Features of the Diamond Controller soundboard are:

-Greatly increased Memory Space (256MB compared to 16MB on v4 soundboard)
-10 different soundfonts
-Change soundfonts with push of a button
-Synchronized sound and light effects for unlimited unique variations and possibilities
-Can use .lsu or .wav files (48KHz 16bit)
-Update firmware with Launcher
-Unlimited Awesomeness

Sound

Obsidian USB V3! [V3]

Pick the type of sound install you want for your saber.


UltraSabers new soundboard


Features of the NEW Obsidian Soundboard with Chassis are:


-Built on chassis, ⏀1.3”, 4” long
-Powered by a single 3.7V, 18650 Li-Ion rechargeable battery
-Built-in battery holder and electrical protection
-Built-in audio amplifier and speaker
-Drives 2 LEDs and a 127-pixel string blade, simultaneously
-Up to 10 fonts, up to 25 sounds per font
-Up to 6 : 40 minutes audio memory
-Auto-power-off at timeout and low battery

Click here for technical specs for NEW Obsidian Soundboard.

Click here for users guide for NEW Obsidian Soundboard.



Features of the v4 soundboard are:


-Greatly increased Memory Space
-Increased processing power
-Multiple soundfonts
-Change soundfonts with push of a button
-Can use .lsu or .wav files (48KHz 16bit)
-Update firmware with Launcher
-Mac Compatibility for new Launcher
-Much more robust and easy to use Launcher
-New Sound Installation Wizard
-Ability to change size and quantity of sound banks
-Infinite Awesomeness.

New Obsidian Sound

NEW Obsidian USB Lite Sound with Chassis!

Switch Type

Guarded Switch
Select your lightsaber's A/V Switch.  The AV Switch will control the power to the saber as well as allow you to operate the Obsidian Soundboard, Emerald Driver, or Diamond Controller if your saber is configured to include them.

UltraSabers-Lightsaber-AV-Switches

Select from the standard Guarded switch, an illuminated or non-illuminated AV Switch switch here. These AV switches are just for cosmetic purposes- they make your saber look cool, they do not serve for any additional functionality, and are not required for any additional functionality.

***Non Illuminated AV Switch on LEFT. Guarded Switch on RIGHT. Sabers in picture are shown for reference only. Guarded Switches are BLACK on Sabers with Sound. Guarded Switches are Silver, Red, or Blue on Sabers WITHOUT Sound.***

AV Switch Channel

Channel 4 (Dedicated to AV Switch) [Recommended]
This option ONLY applies if you selected an illuminated AV Switch. If you did not opt for an illuminated AV Switch then please disregard this option.

Also, AV Switches do NOT change colors. Once you select a color it will always be that color. This option only dictates how we supply power to the LED on the illuminated AV switch.


Switch Hole Type

Guarded Switch Hole Type
Choose the switch hole type for your empty hilt!

Guarded Switch Hole Type: Your empty hilt will have a switch hole drilled to work with our normal guarded switches. These switches are meant to be PRESS FIT into the switch hole. No backing nut or adhesive required.

AV Switch Hole Type: Your empty hilt will have a switch hole ENLARGED to work with our 16mm AV switches. These switches are meant to be attached with a backing nut and/or High Performance hot melt adhesive.

Choose Blade Tip Type

Round Tips on all blades
Round Tips look round and pointed tips look pointed. There is absolutely no other difference.

There is a surcharge for pointed tips because we do not stock these and would have to custom make the blade for you. They are not superior in any way. It is just a preference if you want your tip to be round or pointed.

99% of Ultrasaber blades are made with round tips.

Renegade SE Claw Finish

Silver
The claws of The Renegade SE can come with Black or Silver finish. Select the finish of your claws here.

Renegade SE Pommel Size

Large
The Renegade can come with a Large Style or Small Style Pommel. Select your pommel style here.

Large Pommel is pictured on the right and Small Pommel is pictured on the left.

(Renegade LE is shown for reference only, your hilt finish will match the hilt type ordered. See pictures of both pommel types in the item description below)

Ship Renegade Assembled?

No, Ship Disassembled
If you opt to ship assembled then the saber will come fully assembled right out the box. The claws will be attached and the blade will be attached and no assembly would be required for the hilt. You would just need to attach the blades. However, given the size of the saber fully assembled this will have to ship in a multiple boxes the shipping may cost more. Recommended for those that like instant gratification or do not like to to do any assembly.

If you opt to ship disassembled the saber will come with the claws removed and some (simple) assembly will be required. The claws will come detached and you will simply have to use a 3/32 hex wrench to attach them to the emitter. This will allow the saber to ship in our standard size box and will save some on shipping. Recommended for those that don't mind some assembly out the box.

Blade Retention Screw Wrench

No Thanks
The Blade Retention Screw Wrench is just the small allen wrench required to remove the blade. This wrench is NOT required to hold the blade in place. That screw is provided standard with every Ultrasaber.

You can also purchase these separately from any hardware store, or you may already own a set of these. Purchasing this one guarantees that you will get the correct size wrench for the screw in your Ultrasaber. Using the wrong size wrench can strip your retention screw.

All Ultrasaber retention screws require Standard size hex wrenches, DO NOT USE METRIC SIZE WRENCHES, you will strip the screw.

Include Blade Plug

No Thanks
Blade Plugs are designed to be inserted in your saber when the blade is removed to protect your LEDs. They give the hilt a cool look when the saber is ignited, and prevent you from shining a high powered LED directly into yours or someone else's eyes.

Select an option above to see illuminated examples of each blade plug.

Include Saber Stand

No Thanks
Very basic assembly is required for stands. Any damage from assembling incorrectly is not covered under warranty.

***Sabers in pictures are NOT included with the stand, and are only shown for reference***

Include MICRO USB Cable

No Thanks
A MICRO USB cable is needed in order to interface your saber's Diamond Controller with the Ultrasabers Launcher on your computer when changing your installed fonts, effects, and gestures.

You can download the Ultrasabers Launcher for the Diamond Controller here.

[Note: This cable is NOT used for any charging purposes]

Choose Your Setup

STUNT SETUP
Note: Not all hilts are compatible with every setup.

***STUNT SETUP***
- Standard Setup Battery Configuration (4 AAA batteries included)
- Standard Guarded Switch
- No Sound Effects
- 36” Heavy Duty Blade with Round Tip



***BASIC (LITE) SOUND SETUP***
- Standard Setup Battery Configuration (4 AAA batteries included)
- Silver Finish Non-Illuminated AV Switch
- Obsidian Lite Soundboard installed
- 36” Heavy Duty Blade with Round Tip



***PREMIUM SOUND SETUP***
- Li-Ion with BuckPuck Setup Battery Configuration (Trustfire Charger & Batteries included)
- Silver Finish Non-Illuminated AV Switch
- Obsidian v3 Soundboard installed
- 36” Heavy Duty Blade with Round Tip



***EMERALD DRIVER + SOUND SETUP***
Read about Emerald Sabers here (hold ctrl and click the link to open it in a new tab)
- Li-Ion with BuckPuck Setup Battery Configuration (Trustfire Charger & Batteries included)
- Silver Finish Non-Illuminated AV Switch
- Obsidian v4 Soundboard installed
- 4 Channel Emerald Driver installed with RGBW LED
- 36” Heavy Duty Blade with Round Tip


***NOT INCLUDED***
-Blade Plug
-Covertec Clip
-Lightsaber Stand
-Blade Retention Wrench
-USB Cable
-Recharge Port -Flash on Clash

Include MINI USB Cable

No Thanks
A MINI USB cable is needed in order to interface your saber's Obsidian Soundboard or Emerald Driver with the Obsidian Launcher on your computer when changing your installed soundfonts or blade color.

You can download the Obsidian Launcher here.

[Note: This cable is NOT used for any charging purposes]

Include Covertec Clip

No Thanks
A covertec wheel is the knob on a lightsaber that allows you to attach the lightsaber to a covertec clip and wear it on your belt.

A covertec clip is the clip that you wear on your belt that allows you to hang your lightsabers from a covertec wheel for costuming or to just carry your saber in general.  This is typically done with the blade removed.  The blades are removable on ALL Ultrasabers.

Not all Ultra Sabers come standard with a covertec wheel. All Prophecy models, all Shock Models, The Bane, The Bellicose, The Overlord, The Guardian, The Graflex SE & CE, and The Consular all come standard with a covertec wheel and one does not have to be added or purchased.


You can purchase a covertec wheel separately from here.
(Link will open in a new tab)

You can purchase a covertec clip separately from here.
(Link will open in a new tab)

Install Covertec Wheel

No Thanks
A covertec wheel is the knob on a lightsaber that allows you to attach the lightsaber to a covertec clip and wear it on your belt.

If your UltraSaber doesn't come standard with a covertec wheel, you can have one added before it ships. In the comments field of your order, specify where on the hilt and what color covertec wheel (silver, black, or gold) and we'll take care of that for you before the saber ships.

Please keep instruction to TWO things ONLY in the comments field of the order at checkout:

1: Left, Right, or Rear (activation switch representing the front) and
2. Near Pommel or Above Switch.

Those are the only two pieces of information we need for covertec wheel location requests. Please do not use degrees or clock rotations or include image links for covertec wheel location requests. A proper covertec wheel location request would be "Left Side Near Pommel" or "Rear Side Above Switch" or "Rear Side Near Pommel" etc. You can also not put anything in the comments field and we will select an excellent default location for your covertec wheel install.

Renegade SE

Availability: LEAD TIME - Allow 3 to 5 Business Days for Fabrication

Questions? Call 832.596.9003 or Click Here for How to Buy

SPECIFICATIONS

  • All aircraft aluminum construction
  • 1.5" wide at grip
  • 8.5" wide at crossguard emitters
  • 11.25" wide at crossguard claws
  • 16.5" long
  • Removable emitters & pommel (MHS compatible)
  • Polycarbonate UltraBlade
  • Low profile guarded push button switch
  • Seoul P4 or LED Engin High Powered LED
  • Powered by 4 AAA batteries

Description

The new Renegade is our second rendition of the highly requested Crossguard style emitter in the Ultrasabers lineup. The Renegade SE is of course fully made of T6 Aircraft Aluminum and combat ready. The Renegade SE Lightsaber has an all silver high polished aluminum finish. All 3 blade holders are MHS compatible and exchangeable with other MHS parts. The Renegade is able to accommodate sound installs, Emerald LED driver installs, and has a MHS compatible pommel.

This is a large saber but it is surprisingly light weight for its size which makes it a great saber for younglings and adults alike. The length of the hilt makes it great for two handed combat, but with practice, its light weight lightsaber hilt design makes it possible for one handed combat. The Stunt Renegade SE comes standard with a 40″ or 36″ main blade. We also give you the option of 6″ or 8″ blades for the crossguard.

Here are some numbers as measurements for our customers that like to analyze the numbers. The Renegade SE is 1.5″ wide at the grip and 16.5″ long from the top of the main emitter to the bottom of the pommel. It is 8.5″ wide from the end of the left emitter to the end of the right emitter (5.5″ without the emitters) and 11.25″ wide from the end of the left claw to the end of the right claw. The standard Renegade emitters add 1.5″ in height. With 6″ blades from left tip to right tip the saber is 17″ long. With 8” blades from tip to tip the saber is 21″ long. The Main blade holder has a 2.5″ deep blade socket. The left and right blade holders also have 2.5″ blade socket.

This saber comes completely assembled and ready to go. The pommel and emitters are removable and compatible with TCSS MHS parts. Getting the saber Sound and the Emerald LED driver are also available options.

REVIEWS