Dark Princess Lightsaber

The Dark Princess From Ultrasabers
The Dark Princess - Ignited
The Dark Princes Hilt
The Dark Princess Windowed Emitter & Thin Neck
The Dark Princess Grip & Pommel
The Dark Princess Full Hilt
The Princess - All 4 Models
The Dark Princess From Ultrasabers
The Dark Princess - Ignited
The Dark Princes Hilt
The Dark Princess Windowed Emitter & Thin Neck
The Dark Princess Grip & Pommel
The Dark Princess Full Hilt
The Princess - All 4 Models
The Dark Princess From Ultrasabers
The Dark Princess - Ignited
The Dark Princes Hilt
The Dark Princess Windowed Emitter & Thin Neck
The Dark Princess Grip & Pommel
The Dark Princess Full Hilt
The Princess - All 4 Models
Placeholder
Step 2 / 8
Previous
Next

Switch Hole Type

Choose the switch hole type for your empty hilt!

Guarded Switch Hole Type: Your empty hilt will have a switch hole drilled to work with our normal guarded switches. These switches are meant to be PRESS FIT into the switch hole. No backing nut or adhesive required.

AV Switch Hole Type: Your empty hilt will have a switch hole ENLARGED to work with our 16mm AV switches. These switches are meant to be attached with a backing nut and/or High Performance hot melt adhesive.

Dark Princess Lightsaber

$32.38 OFF! $161.88 $129.50

CUSTOMIZATION BREAKDOWN

Choose Your Configuration

Empty/DIY Hilts

Switch Hole Type

Guarded Switch Hole Type
Choose the switch hole type for your empty hilt!

Guarded Switch Hole Type: Your empty hilt will have a switch hole drilled to work with our normal guarded switches. These switches are meant to be PRESS FIT into the switch hole. No backing nut or adhesive required.

AV Switch Hole Type: Your empty hilt will have a switch hole ENLARGED to work with our 16mm AV switches. These switches are meant to be attached with a backing nut and/or High Performance hot melt adhesive.

Princess Pommel Type

No D-Ring

Choose the pommel for your Princess Saber



The Princess is available without a D-Ring clip, or with D-Ring (+$5.00).

Blade Retention Screw Wrench

Sure!
The Blade Retention Screw Wrench is just the small allen wrench required to remove the blade. This wrench is NOT required to hold the blade in place. That screw is provided standard with every Ultrasaber.

You can also purchase these separately from any hardware store, or you may already own a set of these. Purchasing this one guarantees that you will get the correct size wrench for the screw in your Ultrasaber. Using the wrong size wrench can strip your retention screw.

All Ultrasaber retention screws require Standard size hex wrenches, DO NOT USE METRIC SIZE WRENCHES, you will strip the screw.

Include Blade Plug

No Thanks
Blade Plugs are designed to be inserted in your saber when the blade is removed to protect your LEDs. They give the hilt a cool look when the saber is ignited, and prevent you from shining a high powered LED directly into yours or someone else's eyes.

Select an option above to see illuminated examples of each blade plug.

Include Saber Stand

No Thanks
Very basic assembly is required for stands. Any damage from assembling incorrectly is not covered under warranty.

***Sabers in pictures are NOT included with the stand, and are only shown for reference***

Include Belt Clip

No Thanks
A belt clip wheel is the knob on a lightsaber that allows you to attach the lightsaber to a belt clip and wear it on your belt.

A clip is the clip that you wear on your belt that allows you to hang your lightsabers from a belt clip wheel for costuming or to just carry your saber in general.  This is typically done with the blade removed.  The blades are removable on ALL Ultrasabers.

Not all Ultra Sabers come standard with a belt clip wheel. All Prophecy models, all Shock Models, The Bane, The Bellicose, The Overlord, The Guardian, The Graflex SE & CE, and The Consular are just a few of the sabers that come standard with a belt clip wheel and one does not have to be added or purchased.


You can purchase a belt clip wheel separately from here.
(Link will open in a new tab)

You can purchase a belt clip clip separately from here.
(Link will open in a new tab)

Install Belt Clip Wheel

No Thanks
A belt clip wheel is the knob on a lightsaber that allows you to attach the lightsaber to a covertec clip and wear it on your belt.

If your UltraSaber doesn't come standard with a belt clip wheel, you can have one added before it ships. In the comments field of your order, specify where on the hilt and what color covertec wheel (silver, black, or gold) and we'll take care of that for you before the saber ships.

Please keep instruction to TWO things ONLY in the comments field of the order at checkout:

1: Left, Right, or Rear (activation switch representing the front) and
2. Near Pommel or Above Switch.

Those are the only two pieces of information we need for belt clip wheel location requests. Please do not use degrees or clock rotations or include image links for belt clip wheel location requests. A proper belt clip wheel location request would be "Left Side Near Pommel" or "Rear Side Above Switch" or "Rear Side Near Pommel" etc. You can also not put anything in the comments field and we will select an excellent default location for your belt clip wheel install.

Dark Princess Lightsaber

Cart Keep Shopping

Availability: LEAD TIME - Allow 1 to 3 Business Days for Fabrication

Questions? Call 832-596-9003 or Click Here for How to Buy

SPECIFICATIONS

  • All Aircraft Grade Aluminum Construction
  • Length: 13.5”
  • Width: 1.5”
  • Removable Pommel (MHS Compatible)
  • Removable Emitter (MHS Compatible)
  • Polycarbonate Blade
  • CREE XP-E2 or LED Engin High Powered LED

Featured Videos

Description

The Dark Princess - Ignited

No.  There is another…

Ultrasabers is proud to present: The Dark Princess.

We’ve been pretty hard at work this year, and we know you’ll all be just as excited as we are to add this saber to the Ultrasabers lineup.  Say hello to the Dark Princess.  The Dark Princess brings an absolutely unique design to the arsenal, and is packed with features and details you won’t find on any other Ultrasaber.

We’ve designed the Dark Princess to be an unmistakable saber both in and out of combat.  A thin-neck design is one we’re proud to bring to another saber, but this will be the first time one has been topped with a windowed Emitter!  Twelve (12) horizontal windows wreathe the emitter of the Dark Princess, giving it a brilliant glow and amazing look while ignited.

We knew the Dark Princess needed to flourish in combat so we included a number of choke-points below the thin-neck that give the wielder several options to position a main hand for quick spins and fast-paced combat.  We crafted the Dark Princess to be light enough to be wielded comfortably with a single hand while being long enough for a comfortable grip with a second hand to accommodate various combat styles.  The grip of the Dark Princess features a new ridged design, with anodized accents that match colors across the emitter and pommel.

Finally, the Dark Princess is as bold as she is tenacious, and her presence is not to be missed.  The pommel of this saber has been designed to announce itself in battle, featuring a resonance chamber that amplifies sound when equipped with any of the Obsidian Soundboards (which we definitely recommend).

The Princess will come standard with a non-illuminated A/V switch, and Heavy Grade Blade.

The Princess will be available in our four standard anodized finishes:

  • The Princess itself will arrive in our regal and commanding Gold.
  • The Azure Princess will come anodized in our brilliant and royal blue
  • The Crimson Princess will be available in our sinister red
  • The Dark Princess will feature the classic black you see here

REVIEWS

Related products